Bowser washers are ideal for remote and difficult to access locations, particularly those with no power or water availability. This Maxflow 250 gallon / 1100 litre bowser washer is mounted on a robust road tow trailer with Yanmar L100V diesel engine and Comet RW 4030 S high pressure pump
Features:
206 bar / 3000 psi
15 litres per min
Belt driven
30 m high pressure hose on reel
Heavy duty lance and suction pipes
LxWxH (mm): 3400 x 1530 x 1350
Features:
Brass Head
Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
Piston Guides are Heat Treated Stainless Steel
Highly Efficient Stainless Steel Check Valves
Solid Ceramic Plungers
Brass Manifold: Forged for Maximum Strenght and Longer Life up to 310 bar
One Piece, Solid Bronze Alloy Connection Rods
High Quality Tapered Roller Bearings
Large Oil Capacity Dissipates Heat and Improves lubrication for Longer Life
Exclusive No-Oil-Leak System in the crankcase minimising wear of the piston oil seal (Patented)
Exclusive Sealing System Between Crankcase And Pump Head that prevents dust and dirt getting inside where the pistons work but letting water out (Patented)
Solid Shaft 24mm for Belt Drive, Gearbox or Flex Couplers
PA RL30 High Pressure Spray Guns 310 Bar 40 Lpm. Guns suitable for use up to 310 bar – 31 MPa rated pressure pump. No fluid passage upon trigger release. Front hose fitting. Covered by shockproof plastic semi-housings. Stainless steel seat and ball. Internal structure in brass and Stainless Steel. Ergonomic construction. Minimum fatigue for trigger opening. Complete with swivel inlet
Features:
Brass Head
Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
Piston Guides are Heat Treated Stainless Steel
Highly Efficient Stainless Steel Check Valves
Solid Ceramic Plungers
Brass Manifold: Forged for Maximum Strenght and Longer Life up to 310 bar
One Piece, Solid Bronze Alloy Connection Rods
High Quality Tapered Roller Bearings
Large Oil Capacity Dissipates Heat and Improves lubrication for Longer Life
Exclusive No-Oil-Leak System in the crankcase minimising wear of the piston oil seal (Patented)
Exclusive Sealing System Between Crankcase And Pump Head that prevents dust and dirt getting inside where the pistons work but letting water out (Patented)
Solid Shaft 24mm for Belt Drive, Gearbox or Flex Couplers
Professional Wash Gun with patented LTF-Low Trigger Force 90% reduced holding force & 40% reduced trigger force against usual market guns. Complete with swivel inlet
Features:
Brass Head
Die-Cast Aluminum Alloy for Protection Against Corrosion
Piston Guides are Heat Treated Stainless Steel
Highly Efficient Stainless Steel Check Valves
Solid Ceramic Plungers
Brass Manifold: Forged for Maximum Strenght and Longer Life up to 345 bar
Solid Bronze Alloy Connection Rods
High Quality Tapered Roller Bearings
Large Oil Capacity Dissipates Heat and Improves lubrication for Longer Life
High Volume up to 53,5 l/min
Long Life Seals
Exclusive No-Oil-Leak System in the crankcase minimising wear of the piston oil seal (Patented)
Exclusive Sealing System Between Crankcase And Pump Head that prevents dust and dirt getting inside where the pistons work but letting water out (Patented)
Solid Shaft 24 mm for Belt Drive, Gearbox or Flex Couplers
Our most popular industrial production gun, the ST-2000 is designed for heavy-duty durability. The strongest made gun in it's class takes the abuse.
Features:
Stainless steel spring, needle, ball and seat.
Unitized valve for easy repair.
Forged brass housing for maximum strength.
Features:
Brass Head
Die-Cast Aluminum Alloy for Protection Against Corrosion
Piston Guides are Heat Treated Stainless Steel
Highly Efficient Stainless Steel Check Valves
Solid Ceramic Plungers
Brass Manifold: Forged for Maximum Strenght and Longer Life up to 345 bar
Solid Bronze Alloy Connection Rods
High Quality Tapered Roller Bearings
Large Oil Capacity Dissipates Heat and Improves lubrication for Longer Life
High Volume up to 53,5 l/min
Long Life Seals
Exclusive No-Oil-Leak System in the crankcase minimising wear of the piston oil seal (Patented)
Exclusive Sealing System Between Crankcase And Pump Head that prevents dust and dirt getting inside where the pistons work but letting water out (Patented)
Solid Shaft 24 mm for Belt Drive, Gearbox or Flex Couplers
The Suttner ST2715 guns are stainless steel and come fitted with a ceramic ball, chemically resistant valve and acid resistant stainless steel valve seat. These guns are also fitted with the LTF system, which means the trigger is 40% easier to pull and 90% easier to hold when in operation, compared to standard wash guns. The impact resistant plastic case is also made from materials intended to come into contact with food stuffs as per Regulation (EC) No.1935/2004. Complete with swivel inlet
Product Description:
Quick-Click coupling with Aquastop system, allowing you to connect and disconnect accessories from the end of the hose without having to shut off the tap. The result of Claber research and experience, it is entirely rust-proof (as it has no metal parts), shock-proof, resistant to the elements, UV rays and very high water pressure: up to 40 BAR, well over the usual level in home gardening applications.
Features:
Brass Head
Die-Cast Aluminum Alloy for Protection Against Corrosion
Piston Guides are Heat Treated Stainless Steel
- Highly Efficient Stainless Steel Check Valves
Solid Ceramic Plungers
Brass Manifold: Forged for Maximum Strenght and Longer Life up to 345 bar
Solid Bronze Alloy Connection Rods
High Quality Tapered Roller Bearings
Large Oil Capacity Dissipates Heat and Improves lubrication for Longer Life
High Volume up to 53,5 l/min
Long Life Seals
Exclusive No-Oil-Leak System in the crankcase minimising wear of the piston oil seal (Patented)
Exclusive Sealing System Between Crankcase And Pump Head that prevents dust and dirt getting inside where the pistons work but letting water out (Patented)
Solid Shaft 24 mm for Belt Drive, Gearbox or Flex Couplers
Gun suitable for use with 500 bar – 50 MPa / 7000 PSI rated pressure pumps. Sturdy constructionin stainless steel & brass with dynamic teflon seals. Ergonomic construction with minimum fatigue for trigger opening and reduced pressure loss.
The SIP HDP660/120-02 Electric Pressure Washer has a powerful 3000w 4-pole motor, a durable brass-headed Triplex crankshaft pump, plus a professional unloader valve assembly.
Mecline VRT3 Pressure Regulating Unloader Valve. Hexagonal check valve for a better smoothness. Safety lock at the maximum pressure. Regulation lock for Minimum and Maximum pressure in the knob version. Regulation spring of new concept. New body with inner housing of O-ring in the outlet for a higher resistance.
Trapped pressure valve
Brass & steel construction
Blue cap/spring w/ regulator knob
3/8"BSPF bypass
No gauge port
Product Description:
Quick-Click coupling for a quick, perfect connection. The result of Claber research and experience, it is entirely rust-proof (as it has no metal parts), shock-proof, resistant to the elements, UV rays and very high water pressure: up to 40 BAR, well over the usual level in home gardening applications. The internal Claber-patented spring is extremely resistant and durable.
Features:
Brass Head
Die-Cast Aluminum Alloy for Protection Against Corrosion
Piston Guides are Heat Treated Stainless Steel
Highly Efficient Stainless Steel Check Valves
Solid Ceramic Plungers
Brass Manifold: Forged for Maximum Strenght and Longer Life up to 345 bar
Solid Bronze Alloy Connection Rods
High Quality Tapered Roller Bearings
Large Oil Capacity Dissipates Heat and Improves lubrication for Longer Life
High Volume up to 53,5 l/min
Long Life Seals
Exclusive No-Oil-Leak System in the crankcase minimising wear of the piston oil seal (Patented)
Exclusive Sealing System Between Crankcase And Pump Head that prevents dust and dirt getting inside where the pistons work but letting water out (Patented)
Solid Shaft 24 mm for Belt Drive, Gearbox or Flex Couplers
The Suttner ST2300 Professional guns are our best sellers. Robust and ergonomic design, coupled with impressive maximum flow rates and pressures, means that this gun is suitable for all but the heaviest of duty tasks. Complete with swivel inlet and QR outlet
Opening Force 41N @ 100 bar
Holding Force 21N @ 100 bar
Product Description:
With this connecting element, a simple "click" joins two hoses, reaching any desired length. Tool-free installation, simply apply two automatic couplings to the ends of the hoses and insert the connecting element. Ensures a stable, leak-free connection.
Features:
- Brass Head
Built in Unloader with chemical injector
Built in Easy Start
High efficiency suction-delivery valves
- Stainless steel plungers
Aluminium crankcase without need of oil replacement
Thermal protection valve
Steel shaft with Built – in Key
3/4” HOLLOW SHAFT with flange for coupling to petrol engines
The SIP CW2800 Electric Pressure Washer is fitted with a 2800w brushless induction motor, variable water pressure, and a heavy-duty axial pump for added performance and service life.
The SIP TPHGP760/190 is a petrol pressure washer fitted with a Honda™ engine, and a large space-saving powder-coated frame. It features a brass-headed pump and a heavy-duty metal lance.