Midwest Electrical Ennis|Parts & Accessories

BE 24ft Fibreglass Telescopic Lance

€287.00 incl tax

This 24' 3 Stage Fiberglass High Pressure Telescoping Lance is the perfect accessory for cleaning where you normally wouldn't be able to reach, such as rooftops or other tall structures. Inlet has a female 3/8" NPT thread, M22 male adaptor and a male 3/8" BE / AR2 quick release. Features: Pressure clean two and three storey buildings from the ground. Eliminate expensive & time consuming scaffolding and dangerous use of ladders. Ideal for high sided vehicles and machinery. Fitted with high pressure washgun Manufactured in Fibreglass & Aluminium for durability & lightness. Use with hot and cold water (up to 90°C) Durable and light weight 7.3m max length - 2.6m closed 275 Bar max pressure 30 Lpm max flow - Removable end section with 22mm (M22) screw coupling High pressure gun Inlets: M22M, 3/8" NPTF and 3/8" BE / AR2 quick release 1/4" female nozzle holder BE QR fittings included Nozzle NOT supplied 4.4Kg

Interpump WS151

€760.00 incl tax

Interpump WS151

Hawk NMT 2120 R

€508.00 incl tax

Hawk NMT series (24mm male shaft) 1450rpm pump producing 21lpm at a pressure of 200bar, designed for industrial use, this triplex piston pump features a brass head, ceramic pistons and an aluminium body. Designed for pumping liquids with low viscocity, designed for use with external unloader valve

Hawk NLT 2525 ISR

€707.00 incl tax

Hawk NLT series 1000rpm PTO pump (24mm male shaft) producing 25lpm at a pressure of 250bar, designed for industrial use, this triplex piston pump features a brass head, ceramic pistons and an aluminium body. Designed for PTO applications, will run on 540rpm shaft if nozzle size is matched to suit, designed for use with external unloader valve

Hawk NHD 1415 R

€421.00 incl tax

Hawk NHD series 1450rpm pump (24mm male shaft) producing 14lpm at a pressure of 150bar, designed for industrial use, this triplex piston pump features a brass head, ceramic pistons and an aluminium body. Designed for pumping liquids with low viscocity, designed for use with external unloader valve

Hawk NHD 1415 CR

€443.00 incl tax

Hawk NHD series 1450rpm pump (28mm hollow shaft) )producing 14lpm at a pressure of 150bar, designed for industrial use, this triplex piston pump features a brass head, ceramic pistons and an aluminium body. Designed for pumping liquids with low viscocity, designed for use with external unloader valve, this pump comes fitted with a hollow flange designed to fit electric motors with the coupling MEC100/112

Hawk NHD 1215 CR

€432.00 incl tax

Hawk NHD series (24mm male shaft) 1450rpm pump producing 12lpm at a pressure of 150bar, designed for industrial use, this triplex piston pump features a brass head, ceramic pistons and an aluminium body. Designed for pumping liquids with low viscocity, designed for use with external unloader valve

Comet ZWD 4030 G

€517.00 incl tax

Features: Brass Head Built-in Unloader Valve Increased Fin Depth Increases Surface Area to Maximize Heat Dissipation Stainless Steel Unitized Check Valves Heat-Resistant Solid Ceramic Plungers Operating on Lubricated Packings Reinforced Crankcase for Increased Load Capacity Enlarged Crankcase Increases Oil Capacity for Better Lubrication and Lower Operating Temperatures One-Piece Industrial-Grade Oversized Bronze Connecting Rods 1” HOLLOW SHAFT with flange for coupling to petrol engines

Comet VRX 2522 G

€252.00 incl tax

Features: - Brass Head Built in Unloader with chemical injector Built in Easy Start High efficiency suction-delivery valves - Stainless steel plungers Aluminium crankcase without need of oil replacement Thermal protection valve Steel shaft with Built – in Key 3/4” HOLLOW SHAFT with flange for coupling to petrol engines

Comet TWS 9030 S

€940.00 incl tax

Features: Brass Head Die-Cast Aluminum Alloy for Protection Against Corrosion Piston Guides are Heat Treated Stainless Steel Highly Efficient Stainless Steel Check Valves Solid Ceramic Plungers Brass Manifold: Forged for Maximum Strenght and Longer Life up to 345 bar Solid Bronze Alloy Connection Rods High Quality Tapered Roller Bearings Large Oil Capacity Dissipates Heat and Improves lubrication for Longer Life High Volume up to 53,5 l/min Long Life Seals Exclusive No-Oil-Leak System in the crankcase minimising wear of the piston oil seal (Patented) Exclusive Sealing System Between Crankcase And Pump Head that prevents dust and dirt getting inside where the pistons work but letting water out (Patented) Solid Shaft 24 mm for Belt Drive, Gearbox or Flex Couplers

Comet TWS 7040 S

€915.00 incl tax

Features: Brass Head Die-Cast Aluminum Alloy for Protection Against Corrosion Piston Guides are Heat Treated Stainless Steel - Highly Efficient Stainless Steel Check Valves Solid Ceramic Plungers Brass Manifold: Forged for Maximum Strenght and Longer Life up to 345 bar Solid Bronze Alloy Connection Rods High Quality Tapered Roller Bearings Large Oil Capacity Dissipates Heat and Improves lubrication for Longer Life High Volume up to 53,5 l/min Long Life Seals Exclusive No-Oil-Leak System in the crankcase minimising wear of the piston oil seal (Patented) Exclusive Sealing System Between Crankcase And Pump Head that prevents dust and dirt getting inside where the pistons work but letting water out (Patented) Solid Shaft 24 mm for Belt Drive, Gearbox or Flex Couplers

Comet TWS 10030 S

€940.00 incl tax

Features: Brass Head Die-Cast Aluminum Alloy for Protection Against Corrosion Piston Guides are Heat Treated Stainless Steel Highly Efficient Stainless Steel Check Valves Solid Ceramic Plungers Brass Manifold: Forged for Maximum Strenght and Longer Life up to 345 bar Solid Bronze Alloy Connection Rods High Quality Tapered Roller Bearings Large Oil Capacity Dissipates Heat and Improves lubrication for Longer Life High Volume up to 53,5 l/min Long Life Seals Exclusive No-Oil-Leak System in the crankcase minimising wear of the piston oil seal (Patented) Exclusive Sealing System Between Crankcase And Pump Head that prevents dust and dirt getting inside where the pistons work but letting water out (Patented) Solid Shaft 24 mm for Belt Drive, Gearbox or Flex Couplers

Comet TW 8030 S

€929.00 incl tax

Features: Brass Head Die-Cast Aluminum Alloy for Protection Against Corrosion Piston Guides are Heat Treated Stainless Steel Highly Efficient Stainless Steel Check Valves Solid Ceramic Plungers Brass Manifold: Forged for Maximum Strenght and Longer Life up to 345 bar Solid Bronze Alloy Connection Rods High Quality Tapered Roller Bearings Large Oil Capacity Dissipates Heat and Improves lubrication for Longer Life High Volume up to 53,5 l/min Long Life Seals Exclusive No-Oil-Leak System in the crankcase minimising wear of the piston oil seal (Patented) Exclusive Sealing System Between Crankcase And Pump Head that prevents dust and dirt getting inside where the pistons work but letting water out (Patented) Solid Shaft 24 mm for Belt Drive, Gearbox or Flex Couplers

Comet RW 6030 S

€702.00 incl tax

Features: Brass Head Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion Piston Guides are Heat Treated Stainless Steel Highly Efficient Stainless Steel Check Valves Solid Ceramic Plungers Brass Manifold: Forged for Maximum Strenght and Longer Life up to 310 bar One Piece, Solid Bronze Alloy Connection Rods High Quality Tapered Roller Bearings Large Oil Capacity Dissipates Heat and Improves lubrication for Longer Life Exclusive No-Oil-Leak System in the crankcase minimising wear of the piston oil seal (Patented) Exclusive Sealing System Between Crankcase And Pump Head that prevents dust and dirt getting inside where the pistons work but letting water out (Patented) Solid Shaft 24mm for Belt Drive, Gearbox or Flex Couplers

Comet RW 5530 S

€589.00 incl tax

Features: Brass Head Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion Piston Guides are Heat Treated Stainless Steel Highly Efficient Stainless Steel Check Valves Solid Ceramic Plungers Brass Manifold: Forged for Maximum Strenght and Longer Life up to 310 bar One Piece, Solid Bronze Alloy Connection Rods High Quality Tapered Roller Bearings Large Oil Capacity Dissipates Heat and Improves lubrication for Longer Life Exclusive No-Oil-Leak System in the crankcase minimising wear of the piston oil seal (Patented) Exclusive Sealing System Between Crankcase And Pump Head that prevents dust and dirt getting inside where the pistons work but letting water out (Patented) Solid Shaft 24mm for Belt Drive, Gearbox or Flex Couplers

Comet RW 5030 S

€622.00 incl tax

Features: Brass Head Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion Piston Guides are Heat Treated Stainless Steel Highly Efficient Stainless Steel Check Valves Solid Ceramic Plungers Brass Manifold: Forged for Maximum Strenght and Longer Life up to 310 bar One Piece, Solid Bronze Alloy Connection Rods High Quality Tapered Roller Bearings Large Oil Capacity Dissipates Heat and Improves lubrication for Longer Life Exclusive No-Oil-Leak System in the crankcase minimising wear of the piston oil seal (Patented) Exclusive Sealing System Between Crankcase And Pump Head that prevents dust and dirt getting inside where the pistons work but letting water out (Patented) Solid Shaft 24mm for Belt Drive, Gearbox or Flex Couplers

Comet RW 4030 S

€550.00 incl tax

Features: Brass Head Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion Piston Guides are Heat Treated Stainless Steel Highly Efficient Stainless Steel Check Valves Solid Ceramic Plungers Brass Manifold: Forged for Maximum Strenght and Longer Life up to 310 bar One Piece, Solid Bronze Alloy Connection Rods High Quality Tapered Roller Bearings Large Oil Capacity Dissipates Heat and Improves lubrication for Longer Life Exclusive No-Oil-Leak System in the crankcase minimising wear of the piston oil seal (Patented) Exclusive Sealing System Between Crankcase And Pump Head that prevents dust and dirt getting inside where the pistons work but letting water out (Patented) Solid Shaft 24mm for Belt Drive, Gearbox or Flex Couplers

Comet LW-K 3020 S

€441.00 incl tax

Features: Brass Head Built-in Unloader Valve Forged Bronze Connecting Rods with Lifetime Warranty Hardened Stainless Steel Piston Guides High Efficiency Stainless Steel Check Valves Abrasion Proof, Heat Resistant, Industrial Ceramic Plungers High Quality Buna- Textile Double-Sealing V-Packings Die-Cast, Anodized Aluminum Crankshaft-Fin Design for Optimal operating Temperature High Quality Oversized Ball Bearings Optimal Oil Bath for High Speed Operation S 24mm Solid Shaft for Belt Drive, Gearbox or Flex Couplers

Comet LW 3016 S

€415.00 incl tax

Features: Brass Head Forged Bronze Connecting Rods with Lifetime Warranty Hardened Stainless Steel Piston Guides High Efficiency Stainless Steel Check Valves Abrasion Proof, Heat Resistant, Industrial Ceramic Plungers High Quality Buna- Textile Double-Sealing V-Packings Die-Cast, Anodized Aluminum Crankshaft-Fin Design for Optimal operating Temperature High Quality Oversized Ball Bearings Optimal Oil Bath for High Speed Operation S 24mm Solid Shaft for Belt Drive, Gearbox or Flex Couplers

Comet AXD 3020 G

€328.00 incl tax

Features: Brass Head Built-in Uniflow Unloader and Chemical injector with Inner Stainless Steel Parts Abrasion Proof, Heat Resistant, Industrial ceramic Plungers Stainless Steel Unitized Check Valves Forged Brass Manifold Industrial Duty Construction for Extended Life Patent Registered Ball Bearing Design Built-in Garden Hose Adapter Double-Sealing Buna-Textile U- Packing 3/4” HOLLOW SHAFT with flange for coupling to petrol engines

9334 SPRINGY EXTENDABLE HOSE 15MTR

€36.00 incl tax

9334 SPRINGY EXTENDABLE HOSE 15MTR

Turbo Nozzle Repair Kit Size 07

€36.00 incl tax

Turbo Nozzle Repair Kit Size 07

Turbo Nozzle Repair Kit Size 065

€36.00 incl tax

Turbo Nozzle Repair Kit Size 065

Turbo Nozzle Repair Kit Size 06

€36.00 incl tax

Turbo Nozzle Repair Kit Size 06

Turbo Nozzle Repair Kit Size 055

€39.00 incl tax

Turbo Nozzle Repair Kit Size 055

Turbo Nozzle Repair Kit Size 05

€36.00 incl tax

Turbo Nozzle Repair Kit Size 05

Turbo Nozzle Repair Kit Size 045

€36.00 incl tax

Turbo Nozzle Repair Kit Size 045

Turbo Nozzle Repair Kit Size 04

€36.00 incl tax

Turbo Nozzle Repair Kit Size 04

PA Turbo Nozzle Repair Kit Size 065

€46.00 incl tax

PA Turbo Nozzle Repair Kit Size 065

PA Turbo Nozzle Repair Kit Size 05

€46.00 incl tax

PA Turbo Nozzle Repair Kit Size 05

PA Turbo Nozzle Repair Kit Size 045

€46.00 incl tax

PA Turbo Nozzle Repair Kit Size 045

PA TR1 Adjustable Nozzle Holder

€16.00 incl tax

PA TR1 Adjustable Nozzle Holder

Nozzle Holder with Protector

€5.00 incl tax

Nozzle Holder with Protector

Rotating Nozzle 3/8" FM Size 09

€32.00 incl tax

Rotating Nozzle 3/8" FM Size 09

Rotating Nozzle 3/8" FM Size 065

€32.00 incl tax

Rotating Nozzle 3/8" FM Size 065

Rotating Nozzle 3/8" FM Size 05

€32.00 incl tax

Rotating Nozzle 3/8" FM Size 05

Rotating Nozzle 1/4" FM Size 065

€32.00 incl tax

Rotating Nozzle 1/4" FM Size 065

Rotating Nozzle 1/4" FM Size 05

€32.00 incl tax

Rotating Nozzle 1/4" FM Size 05

Rotating Nozzle 1/4" FM Size 045

€32.00 incl tax

Rotating Nozzle 1/4" FM Size 045

Drain Nozzle 3/8" FM Size Jet 09

€29.00 incl tax

Drain Nozzle 3/8" FM Size Jet 09

Drain Nozzle 3/8" FM Size 08

€29.00 incl tax

Drain Nozzle 3/8" FM Size 08

Drain Nozzle 3/8" FM Size 075

€29.00 incl tax

Drain Nozzle 3/8" FM Size 075

Drain Nozzle 3/8" FM Size 07

€29.00 incl tax

Drain Nozzle 3/8" FM Size 07

Drain Nozzle 3/8" FM Size 065

€29.00 incl tax

Drain Nozzle 3/8" FM Size 065

Drain Nozzle 3/8" FM Size 055

€29.00 incl tax

Drain Nozzle 3/8" FM Size 055

Drain Nozzle 3/8" FM Size 05

€29.00 incl tax

Drain Nozzle 3/8" FM Size 05

Drain Nozzle 1/4" FM Size 065

€25.00 incl tax

Drain Nozzle 1/4" FM Size 065

Drain Nozzle 1/4" FM Size 06

€25.00 incl tax

Drain Nozzle 1/4" FM Size 06

Drain Nozzle 1/4" FM Size 055

€25.00 incl tax

Drain Nozzle 1/4" FM Size 055

Drain Nozzle 1/4" FM Size 05

€25.00 incl tax

Drain Nozzle 1/4" FM Size 05

Drain Nozzle 1/4" FM Size 045

€25.00 incl tax

Drain Nozzle 1/4" FM Size 045

Turbo Nozzle Size 07

€50.00 incl tax

Turbo Nozzle Size 07

Turbo Nozzle Size 065

€50.00 incl tax

Turbo Nozzle Size 065

Turbo Nozzle Size 06

€50.00 incl tax

Turbo Nozzle Size 06

Turbo Nozzle Size 055

€50.00 incl tax

Turbo Nozzle Size 055

Turbo Nozzle Size 05

€50.00 incl tax

Turbo Nozzle Size 05

Turbo Nozzle Size 045

€50.00 incl tax

Turbo Nozzle Size 045

Turbo Nozzle Size 04

€50.00 incl tax

Turbo Nozzle Size 04

PA Turbo Nozzle Size 065

€54.00 incl tax

PA Turbo Nozzle Size 065

PA Turbo Nozzle Size 050

€54.00 incl tax

PA Turbo Nozzle Size 050

PA Turbo Nozzle Size 045

€54.00 incl tax

PA Turbo Nozzle Size 045

PA 250 Bar Blue 070 Turbo Nozzle

€54.00 incl tax

PA 250 Bar Blue 070 Turbo Nozzle

Heavy Duty Turbo Nozzle Size 12

€128.00 incl tax

Heavy Duty Turbo Nozzle Size 12

Heavy Duty Turbo Nozzle Size 11

€128.00 incl tax

Heavy Duty Turbo Nozzle Size 11

Heavy Duty Turbo Nozzle Size 10

€128.00 incl tax

Heavy Duty Turbo Nozzle Size 10

Heavy Duty Turbo Nozzle Size 09

€128.00 incl tax

Heavy Duty Turbo Nozzle Size 09

Heavy Duty Turbo Nozzle Size 08

€128.00 incl tax

Heavy Duty Turbo Nozzle Size 08

Heavy Duty Turbo Nozzle Size 075

€128.00 incl tax

Heavy Duty Turbo Nozzle Size 075

Heavy Duty Turbo Nozzle Size 07

€128.00 incl tax

Heavy Duty Turbo Nozzle Size 07

Heavy Duty Turbo Nozzle Size 065

€128.00 incl tax

Heavy Duty Turbo Nozzle Size 065

Heavy Duty Turbo Nozzle Size 06

€128.00 incl tax

Heavy Duty Turbo Nozzle Size 06

Heavy Duty Turbo Nozzle Size 05

€128.00 incl tax

Heavy Duty Turbo Nozzle Size 05

Variable Head Nozzle Size 06

€4.00 incl tax

Variable Head Nozzle Size 06

Variable Head Nozzle Size 05

€4.00 incl tax

Variable Head Nozzle Size 05

Variable Head Nozzle Size 045

€4.00 incl tax

Variable Head Nozzle Size 045

Variable Head Nozzle Size 04

€4.00 incl tax

Variable Head Nozzle Size 04

Variable Head Nozzle Size 035

€4.00 incl tax

Variable Head Nozzle Size 035

Variable Head Nozzle Size 03

€4.00 incl tax

Variable Head Nozzle Size 03

Variable Head Nozzle Size 065

€4.00 incl tax

Variable Head Nozzle Size 065

Powerjet Variable Nozzle

€12.50 incl tax

Powerjet Variable Nozzle

High Pressure Nozzle 25° Size 10

€9.00 incl tax

High Pressure Nozzle 25° Size 10

High Pressure Nozzle 25° Size 09

€8.00 incl tax

High Pressure Nozzle 25° Size 09

High Pressure Nozzle 25° Size 085

€8.00 incl tax

High Pressure Nozzle 25° Size 085

High Pressure Nozzle 25° Size 08

€8.00 incl tax

High Pressure Nozzle 25° Size 08

High Pressure Nozzle 25° Size 075

€8.00 incl tax

High Pressure Nozzle 25° Size 075

High Pressure Nozzle 25° Size 070

€8.00 incl tax

High Pressure Nozzle 25° Size 070

High Pressure Nozzle 25° Size 06

€8.00 incl tax

High Pressure Nozzle 25° Size 06

High Pressure Nozzle 25° Size 055

€8.00 incl tax

High Pressure Nozzle 25° Size 055