MILWAUKEE M18 ™ ½˝ HIGH TORQUE IMPACT WRENCH WITH FRICTION RING
The M18 FUEL™ high torque impact wrench with ONE-KEY™ technology delivers 1356 Nm of fastening torque in a compact size of 213 mm, which gives more access in tight spaces
The 4 -Mode DRIVE CONTROL™ allows the user to shift into four different speed and torque settings to maximise application versatility Mode 4 bolt removal, provides a maximum nut-busting torque of 1898 Nm then shifts to 750 rpm for unmatched control when removing fasteners
The integrated blow counting sensor enhances the consistent repeatability of the chosen torque setting ONE-KEY™ tool control enables wireless tool customisation for increased productivity and consistent results ONE-KEY™ tool tracking & security offers a Cloud-based inventory management platform that supports both location tracking and theft prevention ½˝ friction ring reception Flexible battery system: works with all Milwaukee® M18™ batteries
POWERSTATE Brushless Motor: Purposely built for the M18 FUEL 1/2″ Hammer Drill to provide Up To 60% More Power than the competitive set
REDLINK PLUS Intelligence: Ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18 System.
REDLITHIUM XC5.0 Battery Pack: Delivers more work per charge and more work over the life of the pack than competitors
Up To 60% More Power: 1,200 in-lbs of torque
Only 6.9″ in length for access into tight spaces and reduced fatigue
LED on foot of tool for better lighting in dark spaces
Compatible with all M18 batteries
Higher power efficiency under load - outstanding torque of 135Nm.
Extremely compact design of 175mm length for access into tight spaces.
Advanced heavy duty chuck providing increased bit grip.
Brushless Powerstate motor for heavy application under load.
Redlink Plus intelligence system delivers an advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load.
Redlithium-Ion battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life.
Individual battery cell monitoring optimises tool run time and ensures long term pack durability.
Battery fuel gauge displays remaining charge.
40 percent brighter LED workspace illumination - vs previous model.
All metal reversible belt clip to hang your tool quickly and easily.
Flexible battery system: works with all Milwaukee M18 batteries.
M18 BLPD2 FEATURES
MOST POWERFUL IN ITS CLASS
Most powerful in its class deliver 85Nm of torque, Up to 18% more power than competitors
Speed 1 ? 0-550 RPM, 0-8800 BPM
Speed 2 ? 0-1800 RPM, 0-28800 BPM
COMPACT & LIGHT WEIGHT
Only 180mm in OAL length
Only 2.0/2.1 KG (PD/DD) with 5Ah battery
NEW ADVANCES HEAVY DUTY CHUCK
New black oxide Jaws to increase grip strength to bits
New sleeve pattern for more grip
Improved chuck mechanism to reduce over-tightening
All-metal gear case and metal chuck vs competition
Advanced overload? to protect against abusive situation
M18 BLID2 FEATURES
MOST POWERFUL IN ITS CLASS
Deliver up to 180 Nm in 3-speed setting
Up to 3400 RPM for faster drilling speed
Up to 4200 IPM for faster drilling speed
MOST COMPACT IMPACT DRIVER IN ITS CLASS
Only 130mm in length (compared to Makita DTD129, 147mm)
Only 0.9 KG (100g lighter than previous model)
Heavy duty full metal gearbox and gears for superior durability and maximum torque
Advanced overload to protect against abusive situations
Core with confidence by delivering AC performance with a maximum core diameter capacity of 152 mm wet & dry
2 speed gearing for a wide range of applications, with laser edged speed and capacity markings into the metal body
Speed 1: up to 75 mm diameter wet & dry coring at 1600 rpm
Speed 2: 76 to 152 mm diameter wet & dry coring 800 rpm
Patented AUTOSTOP™ clutch provides best in class protection, preventing over rotating when losing control or in case of a stuck core
On-board level sensor guides the user to achieve a straight and accurate finish whilst horizontal drilling
On-board pressure gauge allows user to optimise drilling speed in order to get the best lifetime of machine and
The world's first 350 mm battery powered cut-off saw to deliver the power to cut reinforced concrete with a full 350 mm cut capacity
Faster cuts, start to finish: 3 second push button start up eliminates the need to mix petrol and oil, and avoids petrol engine maintenance
No petrol headaches: Can be used indoors due to zero fume emissions
Petrol-equivalent performance with a maximum no-load speed of 5370 rpm and a full 125 mm depth of cut
Quieter than other petrol equivalent saws, with a low engine vibration and well-balanced weight
Keyless adjustable blade guard & on-board water line for wet cutting which is compatible with the M18™ SWITCH TANK™ interchangeable sprayer and water supply system
Separately available cut-off saw cart MXF COSC to maintain straight cuts
The industry's first cordless 28 mm Hex demolition hammer, delivering the power of petrol, corded and pneumatic
Heavy Duty hammer provides 64 blow Joules of impact energy for toughest demolition applications
Floating body anti-vibration technologies allows the user to work all day without reaching dangerous exposure levels
Low 5.17 m/s² vibrations for over 7 hrs (HAVS) non-stop productivity
Fast material removal at 1300 BPM, providing maximum productivity in all applications
Breaks up to 2 tons of concrete or a 12 m (20 cm deep and 30 cm wide) trench on 1 x MXF XC406 battery
AC-equivalent tool life and service friendly with an integrated service indicator light alerting the user every 40 hours to add grease
MILWAUKEE M18ONEFHIWF1-802 1" HIGH TORQUE IMPACT WRENCH WITH FRICTION RING
World's first cordless M18™ 1″ high torque impact wrench replacing AC, petrol and pneumatic wrenches
The M18 FUEL™ high torque impact wrench delivers 2033 Nm of fastening torque at half the size and weight of AC, petrol or pneumatic solutions
Delivers up to 2400 Nm of nut-busting torque that enables bolts up M42 to open
The 4 -Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximise application versatility
The integrated blow counting sensor enhances the consistent repeatability of the chosen torque setting
ONE-KEY™ tool control enables wireless tool customisation for increased productivity and consistent results
ONE-KEY™ tool tracking & security offers a cloud-based inventory management platform that supports both location tracking and theft prevention
Flexible battery system: works with all MILWAUKEE® M18™ batteries
Features and Benefits:
Fuel gauge on board
Displays remaining run time for less down time on the job
All weather performance
Delivers fade free power in extreme jobsite conditions
2X more run time then 5Ah
20% more power than a standard 18V lithium battery
2X more life than a standard 18V lithium battery
Compatible with 60+ tools in the Milwaukee range
Quick heat up time, the tool is ready to use in 20 – 30 seconds.
3 locking head positions to work in multiple orientations – 0?, 45?, 90?.
Tool free replaceable tips.
Dual colour LED to notify user: flashing green when tool is heating up, solid green when the tool is ready for operation and solid red when the tool is off but the tip is hot to touch until the red LED turns off.
Temperature monitoring to maintain heat throughout tough applications.
Bright LED light for increased visibility of soldering application.
Flexible battery system: works with all Milwaukee? M12™ batteries.
The Milwaukee M1418C6 18v Multi-bay Charger charges up to 6 batteries sequentially and features a by-pass mode to select the battery bay that gets charged first.
Features and Benefits
Charges up to 6 batteries sequentially
By-pass mode to select the battery bay that gets charged first
Integrated hang holes for vertical mounting
Convenient carrying handle
High Definition Work Lighting
Features and Benefits:
Milwaukee M18 HSAL-0 ROCKET LED Tower Light 110v with TRUEVIEW™ High Definition Lighting.
Twelve high performance LEDs & 3 light settings provide up to 2000 Lumens on high – brighter than a 250 Watt halogen light.
The 3 light settings allow the user to manage light intensity & runtime to how you need it.
AC110V/DC hybrid light, dual power source, the M18 HSAL-0 can be powered by either M18™ REDLITHIUM-ION™ battery packs or the 2.5m included extension cord for unlimited runtime.
Impact resistant, adjustable head with highly durable polycarbonate lens can be rotated 230? vertically and pivoted 240? horizontally.
The protective guard secures the head and lens when the light is collapsed for storage or transport for durability.
Extendable mast adapts from 1.10m to over 2.20m to light up work spaces from top without casting unwanted shadows.
Compact footprint with low center of gravity and impact resistant reinforced nylon legs to protect against abusive jobsite conditions.
Carry handles on two positions for easy one handed transport: weight is evenly balanced when compressed & the low battery indicator light flashes when battery pack is low.
IP54 – protected from dust and splashing water.
Supplied with : 2x 5.0Ah li-ion batteries, fast charger & dynacase
M18™ brushless circular saw with a 190 mm blade giving a 66 mm depth of cut which enables the saw to cut three stacked 19 mm OSB boards.
REDLINK™ overload protection electronics in tool and battery pack deliver best in class system durability.
REDLITHIUM-ION™ battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life.
Durable metal rafter hang hook for work space management and safety.
Vacuum adaptor supplied fits directly to all Milwaukee® dust extractors.
Pressed aluminum shoe for maximum durability.
Integrated LED light for workspace illumination.
50° bevel capacity with a 46 mm depth of cut.
Flexible battery system: works with all Milwaukee® M18™ batteries.
Up to 325 x 4.8 mm Stainless Steel rivets on a single charge with one 2.0 Ah battery pack
Suitable for all aluminium, steel, stainless steel and copper rivets up to 4.8 mm
Rivets in one stroke with a 20.32 mm stroke length
Retention nose pieces hold rivets in any orientation
Tool-Free access to easily clean jaws. On-board nose piece storage and removal tool for user convenience.
On board fuel gauge and LED light – added user convenience and illumination in low lit working conditions
Ergonomic design with 273 mm H x 66.8 mm W – 165 mm in length without mandrel collector
Integrated belt hook and lanyard tie off point
REDLITHIUM-ION™ battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life
Flexible battery system: works with all Milwaukee? M12™ batteries
Supplied with 4 x Retaining Tips
M18 FIW but with ONE-KEY technology
Connect via Bluetooth with the Milwaukee ONE-KEY app
Complete tool customisation via ONE-KEY app to tune the tool to your needs
Control speed, torque, start and end speeds and LED
Configure to any application choosing optimum tool settings for repeatable precision
Program and save profiles for unmatched control
Select from a range of application profiles or quickly create your own for perfect results on every trigger pull
Save up to 4 custom settings to the tools memory for fast selection on the jobsite
ONE-KEY app also provides inventory function for total management of your complete tool and equipment fleet
The THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. The web forms the internal core of the drill bit.
Larger web thickness with strength built in.
Accepts higher feed pressure and torque.
Longer life and less breakages.
Good for drilling deep holes and on curved surfaces.
Patented REDLINK intelligence protects the pack from tough jobsite conditions to ensure optimum performance
Runs up to 50% cooler than other M18 REDLITHIUM-ION battery packs through heavy applications, allowing tradesmen to push their cordless tools harder and longer than ever before
Drives complete corded replacement on the job site with more run time than ever before
Durable metal frame battery construction with shock responsive separators prevents pack failure from excessive vibrations or drops
On-board battery fuel gauge helps the user to maximise battery run-time efficiency
Individual cell monitoring ensures optimal charge and discharge for maximum life
Compatible with all M18 tools in the range
The feed screw design allows the bit to pull through the wood faster, resulting in faster drilling.
Replacement blades made with hardened steel increases bit life.
Size and model number engraved on each bit.
Compact carrying case with handle.