Suitable for standard 400g cartridges

An all-purpose grease gun coupler compatible with both electric (12V ~ 18V) and pneumatic tools

Jefferson Petrol Cement Mixer 2.0HP (Loncin Engine) in Orange for sale online

Manufactured with a composite body and dial-type jumbo 80mm gauge with protective rubber casing displaying pressure in bar and psi

Manufactured with a composite body and dial-type jumbo 80mm gauge with protective rubber casing displaying pressure in bar and psi

Feel the true Force of Jumping Jack! Offering both 24V and 12V jump start capability, the brand-new Jumping Jack Force is all you will need, from motorbikes to cars, Motorhomes and even HGV’s, the Jumping Jack Force will make sure you are never left without power. When most 24v jump starters are heavy, bulky, difficult to use and not to mention expensive, the Force gives you a simple, easy to use, easy to store and easy to carry solution when a flat battery strikes. This Portable 24v Jump starter comes complete with a colossal 24000mAh battery, meaning that it is powerful enough to Jump start up to 11000cc diesel engines. Each unit comes with 24/12V Smart Start Jump Cables, making sure you have added security against Surges, over charge and reverse- Polarity. As well as providing power for jump starting, The Force is also the perfect portable power pack, with two built-in USB outlets (5v/1A, 5v/2.1A) and a cigarette charger port you can have power when you need it most. As standard, each unit comes with a set of 4 in 1 cables, these handy cables connect directly to the USB port and have connections for Micro USB, Mini USB, Lighting Cable and 30 Pin devices, the perfect tool for keeping all your gadgets charged up. The cigarette charger port also allows use of compressors or portable lights etc. The size of the battery means that you can get up to 12 full charges of the average phone and up to 15 jump starts, making it perfect for long trips on the road, camping or in a motorhome. The Force comes complete with two powerful torch lights. One of these located at the front of the unit and one on the side. These torches work perfect in situations that need a little bit more light and with the side torches ability to alternate between different modes (solid, flashing red and SOS) it can act as the perfect roadside safety light for those dark nights. With its small body shape, incredibly light weight and handy carry handle, the Force is the perfect on the road companion for commercial or domestic user. If you need portable power and the reassurance of jump starting when and wherever you are, look no further than the Jumping Jack Force.

KOSHIN 2" Centrifugal water pump, impellers and volutes are constructed of cast iron for durability and long operating life. Pump casing is made of die cast aluminum for lightweight portability and strength. Protected from damage by a sturdy steel roll cage. Vibration isolators are built-in. Low oil sensor is standard. Self priming to 26 feet, maximum head up to 98 feet.

Lever Ball Valve - JEFA055-CD

Suitable for use with 50 to 205 litre drums

Features: 21m max head 133 Lpm max flow Suction up to 6m (after priming) Loncin LC152F petrol engine Aluminium body, BUNA seals Powder coated carry frame 1"BSP pump ports Aluminium alloy volute & impeller Silicon carbide mechanical seal With port couplings & suction filter Model - Loncin LC25ZB21-1.2Q

Features: 60m max head 500 Lpm max flow Suction up to 6m (after priming) Loncin G200F petrol engine Aluminium body, BUNA seals Powder coated carry frame 2"BSP pump ports Alloy volute & twin impellers Silicon carbide mechanical seal With port couplings & suction filter Model - Loncin LC50ZB60-4.5Q

Features: 23m max head 500 Lpm max flow Suction up to 6m (after priming) Loncin G160F petrol engine Aluminium body, BUNA seals Powder coated carry frame 2"BSP pump ports Aluminium alloy volute & impeller Silicon carbide mechanical seal With port couplings & suction filter Model - Loncin LC50ZB23-3.1Q

Features: 30m max head 750 Lpm max flow Suction up to 6m (after priming) Loncin G200F petrol engine Aluminium body, BUNA seals Powder coated carry frame 3"BSP pump ports Handles suspended solids up to 20mm Cast iron volute & impeller Silicon carbide mechanical seal With port couplings & suction filter Model - Loncin LC80WB30-4.5Q

Features: 35m max head 1000 Lpm max flow Suction up to 6m (after priming) Loncin G200F petrol engine Aluminium body, BUNA seals Powder coated carry frame 3"BSP pump ports Aluminium alloy volute & impeller Silicon carbide mechanical seal With port couplings & suction filter Model - Loncin LC80ZB35-4.5Q

The compact design of the Loncin LC7000I 6KW petrol inverter generator makes for a highly maneuverable and easy to store generator. It can be used for camping, caravanning, home DIY or where sensitive equipment is used. The unit produces a maximum power output of 7KW (7000 watts) with a rated output of 6KW from the 420cc engine. A 28 litre fuel tank can run the Loncin LC7000I inverter generator for up to 6.5 hours. There are 2 x 230v 13a UK 3 Pin sockets, 1 x 230 32a, 1 x 5v USB port fitted to the Loncin LC7000I to connect your electrical equipment up to. The Lc7000i features low noise, fuel efficient and is environmentally-friendly meeting the latest EU Stage V emission standards.

Robust metal blow gun with metal trigger and 1/4" quick release

Moulded handle for anti-slip body and long barrel for additional reach and accuracy

M12FVCL-0 | 12v Wet & Dry Vacuum Cleaner (Bare Unit)

M12HV-0 | 12V Sub Compact Stick Vacuum (Bare Unit))

Features: -Designed with Powerful POWERSTATE™ brushless motor with dual cyclonic debris separation for larger jobsite debris. -Features an additional powered floor tool which allows for a more efficient clean up. Ideal for residential and workshop floors. -Highly efficient HEPA filter which collects 99.97 % of airborne particles down to 0.3 microns. -Removable 0.95 l canister is ideal for easy emptying of debris on or off tool. -Delivers up to 17 minutes of run time on a M18™ 5.0 Ah battery pack. -Design features accessory holder for flexible hose, crevice tool, utility tool, and brush tool. -Extendable hose up to 1.2 m for extra reach and versatility. -Flexible battery system which works with all MILWAUKEE® M18™ batteries.

FEATURES: -Dust class L. Standard MAK-factor > 1 mg/m³. -HEPA filter will collect 99.97% of airborne particles down to 0.3 microns. -DEK 26 compatible allows the vacuum to be easily connected to a powertool. -Low noise of only 76 db (operating sound level). -Cyclonic technology for longer filter life, extended peak performance and bag-less debris collection. -Integrated hanging hook for ladders and scaffolding. -Removable harness transforms the vacuum into a canister style vacuum -Supplied with 1 x floor tool, 1 x crevice tool, 1 x telescopic extension wand, 1 x flexible hose, 1 x dust extraction adaptor. -68 L.

M18-28CPDEX-0 | M18-M28 FUEL Dust Extractor (Bare Unit)

M18CDEX-0 | SDS+ Dust Extractor (Bare Unit)

M18CV-0 | M18 Compact Hand Vacuum (Bare Unit)

M18F2VC23L-0 | Vacuum Cleaner (Bare Unit)